HomeTrackball ProductsPart NumbersCommon FeaturesTrackball EnvironmentalTrackball Info RequestContact Us
 

Track Ball Products > 101 Key Keyboards / Trackball Assemblies

This product is an industrial quality keyboard incorporating our 2.0" trackball pointing device. The keyboard has independent mechanical keys and is PC, XT, AT, and PS/2 compliant.


Keyboard

The keyboard is a separately manufactured, 8" x 20" keyboard, featuring full travel individual key switches and is IBM 101 key compatible.

Features:

  • 101 keys for PC, XT, AT, and PS/2 systems as well as IBM terminals
  • Superior keyswitch contacts help eliminate input errors.
  • High reliability:
    • MCBF 1 x 10^6 operations
    • MTBF = 80,000 hours
    • MCBF (each keymodule> 50 x 10^6 operations)
  • Rugged construction
  • Full-travel (4mm) key switches
  • "Deep Dish" for home keys F and J with dimple on key 5 for touch typing.
  • Matte finished, 2-shot molded keycaps are wear resistant and easy to clean. Keycap colors are: beige/grey (code U9), white/grey (code L9).
  • Materials conform to UL 94
  • Synchronous data format
  • Full N-key rollover.
  • Autorepeat; delay time and rate are programmable from the system (AT mode only).


Specifications:

Power Supply +5VDC +-5%, 180 mA typical
Interface Bi-directional. synchronous serial. The keyboard communicates with the system via clock and data lines.
Data Format IBM compatible. bi-directional. AT, PS/2 modes: data and clock high in idle state. PC mode: data low and clock high in idle state.
Output Drivers Open collector TTL.
Data Buffer All codes are buffered before transmission.
Rollover Full N-key rollover.
Automatic Repeat All keys have Autorepeat function. Delay time and repeat sequence can be modified from system (fixed at 10Hz, after 500ms delay for PC mode)
Reset Keyboard automatically resets at power on. Reset time is 150 msec to 2 seconds.

The keyboard is compatible with PC. XT AT, and PS/2 systems.


Approvals/Regulations (Keyboard Only):

  • Radio Frequency Interference..FCC Part IS, Subpart J. Class B. Post-Vfg. 1046/1984 (VDE 087l. Class B).
  • Electrostatic Discharge: IEC801-2: 15KV


Trackball

A 2.0" panel mount trackball enclosed in a housing designed to compliment the keyboard has been developed with all the features of the standard industrial/military trackballs Evergreen is noted for.


Features:

  • Full optical encoders
  • Ball Bearings supporting hardened nitrided steel shafts.
  • 2.0 inch ball.
  • 400 counts/rev of the ball standard, permitting one pixel resolution.
  • Rate sensitive Dynamic Resolution for fast cursor movement.
  • PS/2 or Serial versions available. Serial version is Microsoft 2-button or Logitech 3-button compatible and can use existing mouse driver.
  • Serial BAUD rates can be factory configured for 1200, 2400, 4800, or 9600 BAUD.
  • The keyboard/trackball assembly is compatible with all systems that use an IBM compatible keyboard and either a serial mouse or a PS/2 mouse. The trackball is independently compatible with other systems such as Silicon Graphics, and DEC

Environmental (Total Assembly):

  • Temperature:0 to 50 C. Operational. -40 to +8.5 C. Storage
  • Humidity:95% RH non-condensing operational
  • Shock:20G any axis
  • Vibration:5G 10-2000Hz
  • Altitude:-1000 to +50,000+ Feet Operational
  • RF/ESD:FCC Part 15 Subpart 3 requires this product to be tested with a host. Evergreen manufactures units meeting MIL-STD461C Part 2-RE-02 (Total assembly compliant with EU Directive 89/336/EEC (Bulletin EU970601))
  • mtbf:25,000 Hours Industrial, 50,000 Hours Office Benign Per MIL-HDBK-217E

Keyboard Inserts Offered:

Panel Mount (Waterproof)
Panel Mount (Water Resistant)
Table Top
(D) - PM200WP waterproof trackball, using three 0.5-inch square flat overlay buttons, backlighted with LED's
(A) - PM200 trackball with 1, 2, or 3 buttons, using oval caps. Ball is not removable.
(A) - PM200 trackball with 1, 2, or 3 buttons, using oval caps. Ball is not removable.
(B) - 2.0 inch trackball with 1, 2, or 3 buttons, using oval caps.
(B) - 2.0 inch trackball with 1, 2, or 3 buttons, using oval caps.
(C) - 2.0 inch trackball with 1, 2, or 3 buttons, using standard 0.5-inch square buttons.
(C) - 2.0 inch trackball with 1, 2, or 3 buttons, using standard 0.5-inch square buttons.

 

 
© 2010 Evergreen Systems International - All Rights Reserved